How we Apply a High-Gloss Coating

How High-Gloss Boat Detailing System Is Applied

We accomplish boat detailing the modern way with high-gloss coatings that are hand-applied.   Yes, that is correct, we don’t have to spray them on, meaning your boat doesn’t even need to be out of the water in many cases.


Once the surface is thoroughly mechanically and chemically cleaned and prepared, the high-gloss solution is applied, performing an amazing transformation that lasts far longer, and does honestly look much better than a traditional boat detailing with a cut and wax polish.   


The high-gloss coating actually seals the surface, making it far easier to keep your boat clean as the contaminants don’t soak into the porous gelcoat.   However, we do recommend either you or we apply a wax every few months, as this will keep the coat looking better and lasting even longer.


See Real-Life Detailing Cases

Ready to Apply High-Gloss Boat Detailing?

We are ready to help you even if you need tailor-made solution.

Drop us a line today for a FREE quote!

Boat Detailing Solution that Lasts Longer and Looks Better, Seriously! Flamingo Sailing Vessel in Sydney Case Study

By Angus | May 17, 2016 | 0 Comments

Boat detailing with wax and polish has been replaced High-gloss coatings for your boat detailing protect your gelcoat or marine paint from UV, last longer (often over 2 years) and make your boat easy to clean. Here at IMC we…

Boat Detailing Success on Rascal

By Angus | April 26, 2016 | 0 Comments

Boat detailing is a kinda of magic thing here at Innovative Marine Coatings. Not for us, of course, but for our clients. Yet, it’s amazing & pleasant indeed to see the final look and nice gloss of the boat you…

Boat Detail coating system on a 19ft ski boat

By Angus | April 7, 2016 | 0 Comments

The gelcoat on this boat was badly marked and oxidised. The oxidation is normally most noticeable on the coloured gelcoat sections where it was turning white. After removing the oxidation and most of the marks, scuffs and scratches the high-gloss…

Boat Detailing Solution for this Malibu Wakesetter with a High-Gloss Coating

By Angus | January 29, 2016 | 8 Comments

Our unique boat detailing system means this wake boat gets to look new again! This Malibu Wakesetter came to us in Sydney with heavy oxidation on the gelcoat, causing fading of the colours.  Also the usual collection of marks and…


By Angus | January 7, 2016 | 0 Comments

Look better longer…that is our mission for our customer’s boat maintenance… How do our solutions actually save you money on your boat maintenance costs though, and is quality compromised for these cost savings?   Here is a quick look at how…

It’s Time to Get Your Boat Ready for Summer!

By Angus | September 7, 2015

  Does your boat need a bit a love before Summer? A boat detailing perhaps, or a new synthetic teak decking?  Perhaps a new colour with a marine Vinyl Wrap? Contact us on 0432 671 403 or 1300 768 900,…

Customer Review – Blue Eyes in Sydney gets a High-Gloss Boat Detailing and Varnish

By Angus | August 26, 2015

  Boat Detailing the Smart Way! Blue Eyes Sydney got a High-Gloss Coating which dramatically improved the gloss and appearance of the gelcoat, while also reducing time spent washing and scrubbing the boat, and eliminated the need for regular cutting…

Cranchi Gelcoat Restoration and UV Protection – Boat Detailing the Smart Way

By Angus | January 23, 2015

Smart Boat Detailing with a High – Gloss Coating Angus gives you an inside look into how we do a gelcoat restoration on a white Cranchi in Sydney, Australia. This gelcoat was quite faded and in poor condition before.  Have a look…

Customer Review: High Gloss Coating on Sydney Charter Boat “JBW” – Boat Detailing the Smart Way

By Angus | January 23, 2015

Boat Detailing the Smart Way – Andy from JBW reviews our High-Gloss Coating How do you bring back the gloss on marine paint once it starts to loose it’s lustre after a few years of sun exposure?  We will show…

Faded white gelcoat repair on a Wellcraft 23 at Artarmon

By Angus | January 4, 2015 | 0 Comments

  International Marine Coatings uses IMC107 specially adapted for gelcoat restoration and protection. The two-pack system provides a clear coat of superior hardness, which in turn provides UV protection which is greatly needed in the harsh Australian conditions. Tested in…

Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn
< ?php echo do_shortcode('[wprevpro_usetemplate tid="1"]'); ?>
%d bloggers like this: